Dry installation approach: Installing adhesive PDLC film can be a dry system. Never use h2o; as a substitute, use ninety nine% isopropyl alcohol (industrial Alcoholic beverages) to scrub glass surfaces. don't operate right until the glass surface is a hundred% dry!

(This is a encouraged dry install with a peel away Smart Cling backing. nonetheless You need to use a ninety five-99% Isopropyl Alcohol mixture or superior as an permitted mounting Answer for simple installation. Spray on glass and squeegee out excess With all the delivered installation tool.)

move one.two: make certain that the adhesive side is struggling with up. will not eliminate the protecting layer Read More Here till you will be instructed During this technique to do so. The adhesive facet is generally marked which has a label or simply a pink stamp.

If air bubbles still persist, diligently raise the FILM, Look at if any dust particles have stuck to the adhesive aspect and clear away them with adhesive tape if so, and Allow the FILM settle yet again with no air bubbles. See photographs underneath.

phase two.1: Using the liquid spray cleaner, spray the glass and use a cleansing roller to get rid of any dust and/or blemishes for optimal installation. Wipe the glass clean which has a cleanse absorbent fabric. The floor from the glass ought to be absolutely easy and immaculate. Repeat this action as necessary.

cleansing Option and cloth: just before making use of the self-adhesive PDLC film, you’ll want to scrub the glass floor extensively. Use a glass scraper with ninety nine% isopropyl Alcoholic beverages and a lint-cost-free fabric to remove any dust, Dust, or debris.

3. Clean the glass surface: make use of a cleaning Alternative and a lint-free fabric to wash the glass area carefully. Be sure to remove any dust, dirt, or particles Which may be existing.

 Generally just one spray cleaner bottle could thoroughly clean eight sqm of glass. With Spray cleaner, you need to take out the water from glass liquid cleaner and afterwards stick film over the glass.

Non-adhesive SmartTint is virtually the identical matter as being the self-adhesive SmartTint. the leading differences are that the non-adhesive version needs a special form of tape to become installed and it is slightly thicker.

Wipe down either side from the protective liner of the film with isopropyl Alcoholic beverages only to get rid of and mud or debris in the shipping and delivery container.

two. make sure that the installation setting is free of particles, Oils and Dust Particles. Wipe down the glass Together with the delivered micro fiber fabric as well as a ninety nine% as well as combination of isopropyl Alcoholic beverages.

Championed with our five 12 months sector primary guarantee, Smart Film stands in advance of all other switchable film competitors. Check out one among our sample kits currently to discover the primary difference!

safe the realm: Cordon from the installation area to avoid interference and sustain a managed natural environment.

Use 65V AC electrical power to your FILM with our transformer or other certified transformer. Each transformer handles different spot depends on its Watt parameter.